GyroView 3 Manual
Laseroptronix
Telephone office 0046-70 714 04 70
Enhagsslingan 23
187 40 Täby
Sweden
E-mail info@laseroptronix.se
www.laseroptronix.se
Page 2
IMPORTANT INFORMATION
Read prior to activation
You have just purchased a complicated electro mechanical device. To operate it properly, please
read this manual carefully. Here are
some common precautions that must be noted.
•NEVER hit the unit while operating or being transported
•NEVER transport the unit without the case
•NEVER disassemble the unit. This device contains high speed rotating parts, which may be
hazardous to you!
•NEVER engage the stabilizing mode while the power supply control indicator is not glowing or
less than 1 minute after activating the unit
•NEVER turn off the unit while stabilizing mode is engaged
•NEVER reverse the polarity of a battery
In operation smart users do following
•ALWAYS remove batteries when not in use for a long period
•ALWAYS keep the objective lenses covered when not in use
•ALWAYS store in a warm dry place when not in use
Features of the Gyroview 16x40 Gyro binoculars
•Stabilized image by high sped gyro system ritating at 12000-14000 RPM
•Rigid construction
•Dual eye pieces
•Diopter adjustment for booth eye pieces
•Value priced 70% below competition
•Textile bag and maintenance equipment in the bag
•Water Resistant IP 44 level ( We have a IP 67 water proof model on request )
•Night Vision eyepieces and adapters (optional)
•Operation on integrated batteries or external power source
