BLU-BD1000
USER MANUAL
15
CONNECTING THE PLAYER
CONNECTING AUDIO
Audio from the BLU-BD1000 can be played through a connected television or a full home
theatre surround sound system.
GOOD: Connecting RCA Stereo
Requires RCA Stereo Audio cable (included)
Standard colours for RCA stereo is WHITE=LEFT channel, RED= RIGHT channel.
1.
Plug the RED and White RCA cables in
to the WHITE and RED RCA STEREO
AUDIO OUTPUT on the player and
plug the other end in to the RCA
Stereo input on the television or the
stereo or Home Theatre system.
2.
Set the connected television, stereo
or Home Theatre system to the input
source used in step #1.
3.
This will allow audio from the player to play on the connected device
.
NOTE:
The STEREO AUDIO OUT terminals will always provide a down-mixed
stereo signal from multi-channel sources. The “Down Mix” and other speaker
settings in the Audio Setup do not affect the STEREO AUDIO OUT.
CONNECTING THE PLAYER
BETTER: Connecting Coaxial Digital Audio
Requires a Coaxial Digital Audio Cable (75 ohm RCA) (not included)
Standard colour for coaxial digital audio ports is ORANGE.
1.
Plug the COAXIAL DIGITAL AUDIO
Cable in to the COAXIAL DIGITAL
AUDIO OUTPUT on the player and
plug the other end in to the COAXIAL
DIGITAL AUDIO Cable input on the
television or Home Theatre system.
2.
Set the connected home theatre
system to the input source used in
step #1.
