BLU-BD1080
USER MANUAL
44
GETTING THE BEST FROM THE PLAYER
Manual Network Settings
If the BLU-BD1080 is unable to connect to your network when the Auto option is selected or
your network has unique requirements the network settings can be set manually.
In the
General Settings
menu select
NETWORK >> IP SETTING >> MANUAL
Use the
Left
and
Right
navigation
buttons select setting to be changed.
Use the
Down
navigation button to
delete the current entry and then use
the keypad to enter the new numbers.
When all the settings are correct press
the
ENTER button.
IP Address
: The Internet Protocol address of the player. Check the IP settings for all other
devices on your network and assign a number that is not in use and in range of the device in
your network that is acting as the DHCP server.
Subnet Mask:
Each IP address has an associated subnet mask. It is used by the player to
decide whether to route network traffic through the router or directly to another device on
the same network.
Default Gateway:
The IP address of the router. It may also be called the Default router or
Gateway on other devices.
DNS (1):
The IP address of the first (primary)
DNS
(Domain Name Server). The DNS is the
mechanism to translate human-readable address (such as
www.laserco.net
) to numeric IP
addresses.
DNS (2):
The IP address of the secondary
DNS
severs if required.
When all the settings have been made and are correct press the
ENTER
button to confirm
the changes.
Please complete a
Connection Test
to check the settings. If all settings are correct a
Network is OK
message should be displayed. If it is not displayed you should go back and
check the physical connections and settings.
