CASE-3S3
QUICK START GUIDE
1
PRODUCT CONNECTIONS AND USE
1.
Remove the end of the HDD case
containing the USB3.0 cable socket
(here on referred to as the “header”)
Note: Ensure any fastening screws
have been removed from the
header
2.
Gently remove, then connect the
header to your HDD, being
careful not to touch any of the
electronic connection surfaces
3.
Screw the header to the HDD and
slide the HDD and header, together,
back into the case. This should
require little to no force.
4.
Once the header and HDD have seated
correctly into the case housing, screw
the fastening screws into the side
of the unit.
FEATURES AND OPERATION
System Requirement
Operation system: Windows XP /Vista /Win7
Features
Suitable for 2.5” SATA HDD
USB3.0 to SATA interface
Transfer rate max up to 5Gb/s
Backwards compatibility with USB 2.0 (480Mbps)
Plug & Play supported
Power Supply: Mains power adaptor
For further product information and instruction please visit our product web page at
www.laserco.net
or email
support@laserco.com.au
Please note: As continual improvements are made to this product, slight operational differences may
occur. For the most up-to-date user manual, please visit our web site.
