DVD-PORTABLE-7B
USER MANUAL
14
SYSTEM SETUP
Play USB and SD/MMC/MS Card
1.
Plug in the USB device noting correct orientation. Press [DVD/SD/USB], then choose
USB to select the content.
2.
Insert a memory card to the SD/MMC/MS slot. Press [DVD/SD/USB] and select SD to
play memory card.
SYSTEM SETUP
1.
Press “SETUP” on the remote to bring up the SYSTEM SETUP MENU.
2.
Press the or
buttons to go to or return to the required settings page.
3.
When the required page is shown press the “OK” button to enter the page.
4.
Use the
▲
or
▼
buttons to navigate to the feature to be changed and then press the
button to enter the submenu.
5.
Use the
▲
or
▼
buttons to select the submenu item and then press the “OK”
button to confirm.
6.
Press the button to return to the previous menu or press the “SETUP “ button to
close the Setup Screen.
Note: Not all discs contain these features. Some features are disc dependent.
General Setup Page
TV Display
4:3: When the player outputs signal to a normal monitor or TV. Wide-screen images
are shown on the screen. But with some parts cropped automatically.
Normal / LB: Normal/LB: When the player outputs signal to a normal monitor or TV,
a normal picture is shown on the screen with a black strip at both the top and
bottom of the screen.
16:9: Wide: When the player outputs signal to a wide screen monitor or TV, a wide
picture is shown on the full screen.
Angle Mark
ON: The screen will show the angle mark icon. (If an angle option is available).
OFF: The screen will not display the Angle Mark.
