NAVC-L08
USER MANUAL
4
WHATS IN THE BOX
FEATURES AND OPERATION
Note: A memory card is required for opera
�
on
The NAVC-L08 requires a Micro SD card (not included) to record video / image content.
(see
page 8 for a table showing SD card capacity and the relevant amount of video / image
content able to be stored).
For op
�
mal performance, we recommend using a Class 4 Micro
SD card (the most common type) to ensure fast data transfer rates.
Power on/o
ff f
unc
�
on (auto on/o
ff
)
To turn on the NAVC-L08, press the power bu
�
on on the top of the device. To turn o
ff
,
press the same power bu
�
on. When connected to the 12v DC socket (cigare
�
e socket) of
your car, the NAVC-L08 will turn on and o
ff
automa
�
cally when the car’s igni
�
on is turned
on or o
ff
. If the NAVC-L08 does not turn o
ff
immediately it means the device is completing
the
fil
e save process before turning o
ff
(usually only a few seconds).
If the 12v socket is “constant on” (in some European vehicles), then the NAVC-L08 will need
to be turned on/o
ff
manually by the power bu
�
on.
Auto Record when turned on
When the NAVC-L08 is turned on (either by pressing the power bu
�
on or auto on) the
device will automa
�
cally begin recording. To stop recording, press the OK bu
�
on or
disconnect the power cable.
Installa
�
on on the car windscreen
The NAVC-L08 works best when mounted centrally and high up on the windscreen (typically
behind or close to the rear vision mirror). Use the supplied windscreen suc
�
on mount to
a
ffi
x the NAVC-L08 to the windscreen and then adjust the mount un
�l
you can see a clear
view of the road ahead on the LCD.
Car Charger
