NAVC-L08
USER MANUAL
5
Recording
Turn on the NAVC-L08. Recording should start automa
�
cally. If not press the “OK” bu
�
on.
When recording, the blue indicator LED will begin to
fl
ash. The recorded
fil
e is saved onto
the Micro SDHC Card. Stop recording by either pressing the
OK
bu
�
on
or turning the car
igni
�
on o
ff
(stopping power to the device)
Changing between modes
Press the MEN
U bu�on to change between modes. Each mode has a unique icon at the top
le� of the screen.
MODE SETTINGS
To enter the Video SETTING
Menu, press the MENU bu�on for 5 seconds. To enter the Setup
Menu, Press Menu bu�on again
Use the UP and DOWN arrows to navigate each op
�
on, the OK bu
�
on to enter and con
fi
rm
and the MENU bu
�
on to toggle across to the SETUP menu.
Press the MENU bu
�
on to exit the SETTINGS op
�
ons and to return to the main screen.
In the event of an incident / accident
–
STOP the Recording
.
- Due to the “cycle recording” nature of this technology, older recorded
fil
es will be overwri
�
en (depending on
the chosen resolu
�
on se
�
ngs and the memory capacity of the Micro SD card). For example a 2GB SD card at
HD resolu
�
on will only o
ff
er you 20 minutes of record
�
me before the
fil
es (2 or 5 or 15min sizes) start to get
overwri
�
en
- Should you wish to KEEP the video footage of an incident from not being overwri
�
en,
stop the recording
soon
a
�
er an incident has occurred (Either press “OK” or disconnect the power or remove the Micro SD card).
- Alternately use a larger capacity SD card or lower the recording resolu
�
on (eg; a 32GB SD card at VGA
resolu
�
on will o
ff
er you 640 minutes of record
�
me) or otherwise use a second Micro SD card as a backup.
