USER MANUAL
SPK-BT15
7
2.
After a short scanning period, your PC or Device will indicate that your SPK-BT15
speaker has been discovered and is ready for connection/pairing
3.
If you are prompted to enter a pin-code, use the code 0000 (four zero’s)
4.
The connection should then be complete and the speaker will be ready for use
Note 1: Manual connection may be required, for example right clicking on the speaker icon once
paired and then selecting “connect”.
Note 2: If the above pairing process has failed, please ensure your Bluetooth receiver or
software has been installed correctly, and then repeat the above steps.
Mac OS X 10 or above
1.
Choose Setup Bluetooth Device from the Bluetooth status menu in the menu bar
2.
Follow the onscreen instructions to pair with the speaker.
Note: If the Bluetooth status menu is not available, open Bluetooth Preference and select the
"Show Bluetooth status in the menu bar" checkbox.
3.
As part of the pairing process, you may need to enter a passkey “0000” (Four zeros)
4.
Open System Preferences and click Sound
5.
Click Output and select the Bluetooth speaker
6.
Click Input and select your speaker. Adjust the Input and Output volume
Note: Some applications, including iChat AV, allow you to select the audio device from within the
application (independently of the default audio input and output selected on the Sound pane
of System Preferences). To use a Bluetooth speaker with iChat AV, select the Bluetooth
speaker for audio input and output on the Video pane of iChat preferences.
Re-Connecting to a Bluetooth device
Each time the SPK-BT15 is switched on, it will attempt to connect to the last device it was
paired with automatically. (The source device must be turned on)
Note: In some cases, the speaker may need to be manually selected from your operating
system sound or hardware output list
