SPK-IPT1000
USER MANUAL
6
OPERATING THE SPK-IPT1000
Setting the Alarm
1.
Press AL1/AL2 once and the LCD screen will display alarm 1 icon. This means alarm 1
is activated. Press again and the LCD screen will display alarm 2 icon and remove
alarm 1, press again and the LCD screen will display both alarm 1 and alarm 2 icons.
Press a 4
th
time to remove both alarms.
P.S. AL MODE & AL SET only work after Alarm 1 or Alarm 2(either or both) are activated.
2.
Press AL MODE to switch alarm mode: iPod (iPhone) > FM > BEEP.
3.
Press AL SET to adjust alarm time, press once and the hour will blink on the LCD
screen. While the display is flashing, press the Previous/next button to adjust the
display.
4.
Press AL SET again and the minute will blink on the LCD screen. While the display is
flashing, press the Previous/next button to adjust the display.
5.
Press the AL SET button to confirm and Alarm settings.
6.
LCD screen will returns displaying time automatically if no operation within 10
seconds.
NOTE: Alarms cannot be adjusted if both alarms are activated. Please ensure that only the
Alarm to be set is shown on the LCD display.
Turning the Alarm ON or OFF
Press the Alarm 1 / Alarm 2 (AL1/AL2) button on the SPK-IPT1000 until the Alarm icon is
displayed.
•
Press once to turn on Alarm 1. Alarm 1 icon is displayed
•
Press twice to turn on Alarm 2. Alarm 2 icon is displayed.
•
Press 3 times to turn on Alarm 1 & 2. Alarm 1 & 2 icons are displayed.
•
Press a 4 time to turn off both alarms. No Alarm icons are displayed.
