QUICK USER MANUAL
SPK-SB100
4
CONNECTING AND TURNING ON
1) Connect the Sound Bar to the Bass unit to the plugs with the white and red labelled
“Output”.
2) Connect the Speaker Cabinet using the RCA cable to your Audio device such as DVD or
Blu-Ray player.
3) Connect the Speaker Cabinet to 240V mains power using the mains cable.
4) Switch the unit on. Note: the default mode is FM radio if no other external audio
device is connected.
5) Adjust the BASS levels using the BASS knob at the back of the speaker cabinet
USING FM RADIO
1) Press the INPUT button to toggle to the RADIO function.
2) For the first time use, press and hold the PLAY/PAUSE to auto search and save the
available channels in your area. These stations will be designated “P 01” through to “P
20”
3) Use the NEXT and PREVIOUS buttons to toggle to your preferred station and adjust
the volume as preferred.
USING BLUETOOTH
1) Press the INPUT button to toggle to the BT function. A BT icon will begin to flash on
screen, which means the Bluetooth “pairing mode” has been activated.
2) Turn the Bluetooth function on, on your device (smart phone or tablet etc).
3) Scan for new devices, and look for SPK-SB100 to pop up on screen.
4) Once found and selected, you will be prompted for a password to complete the
pairing process. The password is 0000 (4 zeros).
5) Once connected and paired, the screen will show a solid BT icon to indicate pairing
has been completed.
6) You are now ready to listen to music wireless via your sound bar. Open your music
files, select a song and press play.
SPECIFICATIONS
Output Power
16 and 6W x 2
Frequency response
40Hz – 20Khz
Impedance
Cabinet 4Ohm, Sound bar 8Ohm
Signal / Noise Ratio
>80dB
Isolation sensitivity
>45dB
Speaker size (Speaker cabinet)
4”
Speaker size (Speaker bar)
3”
Input power
220 – 240v 60Hz
