ENGLISH
24
996kit meet the requirements of the 89/336 directive concerning the Electromag-
netic Compatibility (EMC) and ETS 300/220 rule concerning the radio frequency
device.
INSERT THE WIRE COMING FROM
THE ALARM AS SHOWN
IN THE PICTURE BELOW
IMPORTANT
The recommended position of the siren in the vehicle under bonnet area is usually given on
the vehicle information sheet.
Do not locate in area subject to excess water ingress, or in area of excess heat, exhaust
manifold, turbo, etc...
Self powered siren (904) are fitted with an automatic system for internal battery power
supply. Full charge of the internal siren happens during first
24 hours
of the operation.
Furtherly, the battery power charge is automatically controlled and mantained.
Before disconnecting car battery, you have to wait for 60" after alarm disarming by remote
control or electronic key.
TECHNICAL DATA SIREN 904
POWER SUPPLY ............................................................................................... 12 V DC
CURRENT DRAW (during the first 24h = 10 mA). ................................................ 4 mA
SOUND POWER ............................................................................................ 123 dBm
WIRES COMING
FROM THE ALARM
WHITE
RED
BROWN
GREY
BLACK
ORANGE
BLU
GREY
(BONNET)
DIAGRAM 4
ELECTRICAL CONNECTION OF 904 SIREN
Is996v2 ita-ing.pm6
05/03/98, 16.28
24
Downloaded from
www.Manualslib.com
manuals search engine
