CrossDot-Laser 5P
09
1H 1V
S
When transporting always switch off all lasers, secure pendulum and push the slide switch
to the left.
!
EN
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in
accordance with the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity
of people with pacemakers – may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
Special product features
Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Devices with PowerBright technology have special high-performance diodes to produce
super bright laser lines. These remain visible over longer distances, in bright ambient light
and on dark surfaces.
RX-READY technology enables line lasers to be used even in unfavourable light conditions.
The laser lines pulsate at a high frequency and this can be picked up by special laser
receiversover long distances.
Number and direction of the lasers
Cross-line laser
H = horizontal laser
V = vertical laser
S = slope function
5-point laser
1
Inserting the batteries
Open the battery compartment (9) and insert
the batteries in accordance with the installation
symbols, ensuring the correct polarity.
