56
COMPUTER PROGRAMMABLE FUNCTIONS (connection-installation)
For all models it is possible to program all the functions through a personal computer.
The
connected via USB type
cable t
connected to
device can be
micro B
: he PC needs to be
data network
equipped with WINDOWS 10 or higher.
and
Older
not supported by the program,
operating system’s versions are
PROCEDURE:
S
web
earch and download the software from Laserline
site
Authorize the installation.
A
.
t the end start the software
CONNECTION
:
Connect one end of the USB cable to the device and the other end to the computer.
Wait for the automatic recognition of the device.
The Programmer tool software shows a complete view of the available functions, some parts are
reserved to models with the internal radio receiver.
The software also allows you to set a new emergency PIN code, update the list of available cars
and select the desired model.
USB
Any
setting
Pin-Code / factory parameters / outputs / inputs, must be loaded on
new
, for example
the control unit with the Program Parameters button.
ATTENTION: CHANGES TO THESE SETTINGS MAY AFFECT THE CORRECT OPERATION
OF THE PRODUCT.
