64
The control unit gives
no indication.
Check that, when powering
the product, the LEDs on the
control unit turn on and the
siren, if connected, emits a
beep.
Check the power
supply fuse and the
ground point.
The control unit is
powered but the
system does not
armed.
Check the connections of the
CAN / LIN data network or
connected analog signals.
Check the vehicle code
entered (via button or
via PC) is it correct
The control unit is
powered but the
system does not
armed.
Check, only for the versions
with electronic emergency
key, that the product is
inserted by inserting the key
twice.
If the product does not
armed even with the
electronic key, check
the connection of the
key wire (purple)
