OVERVIEW
The Quad 1000 projects a precise laser beam straight up (Zenith) to 1,200 feet/366m
for the purpose of providing plumb control for your project. It also features a short
range downward shooting laser beam that is used like a plumb-bob or optical tribrach
to easily get directly over your point.
The Quad 1000 is a self- leveling instrument with electronic temperature
compensation. It measures or senses ambient temperature changes while in operation
and continually recalibrates itself to maintain the highest degree of accuracy possible.
This insures consistent, accurate readings for plumb control on your project
throughout the course of the job.
WHAT HAPPENS WHEN YOU POWER-UP?
The Quad 1000 is activated and controlled by a single button. When you push the
power button, the unit begins to self- level. Leveling status and battery power are
displayed on the LCD screen. The downward shooting smaller beam (plumb-bob) is
activated and will be blinking. Once the Quad has self- leveled to within its operating
spec, the plum-bob laser comes on steady and the long range upward (Zenith)
shooting laser beam is activated.
Self-leveling time is normally under ten seconds. After five minutes has elapsed, the
downward shooting plumb-bob laser automatically shuts off to save battery power. If
at a later time you want to check to see if you are over your point, just push the power
button to
OFF
, then push again to
ON
. This will activate the plum-bob laser for five
more minutes.
Zenith plumb laser with
up to 1,200 feet (366m)
of range
Plumb down laser for
getting over your
reference point
Wrap around carrying
handle
Bulls -eye bubble
LCD display with
status indicators
On/Off power button
(Control panel)
Battery door
access knob
5/8 x 11 thread mounting hole
(Underside)
Centering notches (3ea.)
One on each side and
one in front of housing
