8
GB
Technical Data
Automatic levelling range
Accuracy
Operating range (depending on room illumination)
Laser wavelength
Laser class / line laser output power
Power supply
Operating time
Temperature range, operating / storage
Dimensions (W x H x D)
Weight (without wall bracket and batteries)
The transport restraint must be released for horizontal and vertical levelling. The laser lines
×
ash and the LED
lights red as soon as the device is outside the automatic levelling range of 4°. Position the device such that it
is within the levelling range. The LED switches back to green and the laser lines stop
×
ashing (steady light).
!
Do not release the transport restraint, set the ON/OFF switch to „OFF“. Select and switch on
the laser with the selection button. Sloping planes can now be measured. This mode cannot
be used to perform horizontal or vertical levelling as the laser lines are no longer aligned auto-
matically. The LED lights constantly red.
Slope mode
3
Subject to technical changes without notice. 11.10
Guarantee, product care and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
Working range with hand-held receiver
± 4°
±5 mm/10 m
20 m
depending on receiver: 30 to 50 m
635 nm
2/
÷
1 mW
4x 1.5V batteries (type AA, LR6)
approx. 25 hours
0 °C ... +50 °C/-10 °C ... +70 °C
66 x 119 x 124 mm
0.43 kg
02_Manual_SCL_2P_Rev1110_GB.indd Abs1:8
24.11.2010 11:01:32 Uhr
