10
3
4
EN
Material characteristics
This instrument has 4 selectable material
characteristics. Before making a measure-
ment, press the
MODE
button to select
the appropriate material.
Wet/dry LED indicator
In addition to numeric measurement display in % of relative
material moisture, the LED display also provides a material-
dependent evaluation of moisture. The LED display bar
becomes larger, from left to right, with increasing moisture
content. The 12-position LED display is subdivided into 4 green
(dry), 3 yellow (moist) and 5 red (wet) segments. Wet material
causes an additional acoustic signal.
The classification „dry“ means that materials in a
heated room have reached a balanced moisture level
and are thus suitable for further processing.
!
Screed cement screed CT-C30-F4 DIN EN 13813
Plaster
gypsum plaster (machine plaster) in accordance
with DIN EN 13279-1/plaster thickness = 10 mm
Soft-
wood
low-density woods: e.g. spruce, pine, limewood,
poplar, cedar, mahogany
Hard-
wood
higher-density woods: e.g. beech, oak, ash, birch
5
Moistur
eFinder Compact
Application notices
