Inserting the batteries
Open the battery compartment (10) and insert the
batteries in accordance with the installation sym-
bols, ensuring the correct polarity. Close the cover.
Battery charge low: replace batteries when LED (11)
lights up.
Switching on
Turn the ON/OFF switch (2) to the left, thereby releasing the transport
securing device. The unit is ready for use when the selector key lights up
and a horizontal laser line appears. Further laser lines can be switched on
or off by pressing selector key repeatedly.
H
H+V
1
+P
V
1
+P
H+V
1
+V
2
+P
SuperCross-Green 3
1 x
2 x
3 x
Aligning
For approximate adjustment of the lasers, the top part can be turned on the
base. Precise positioning can then be done with the precision adjustment
knob (3). The adjustable feet (4) allow the device to be positioned on sloping
surfaces.
i
Note:
If the device is too far off the horizontal (more than 1,5°), the lasers will
switch off. Align the device using the adjustable feet (4) or place on a more
level surface. The round vial (8) is provided as an aid to alignment.
SuperCross-Green 3
9
GB
