SuperSquare-Laser 2G
07
EN
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014/AC:2017
90° line Laser
– The 2 clearly visible laser lines are ideally suited for
aligning tiles.
– Vertical and horizontal levelling on walls
– The applied lay edges and contact surface make it easy
to position floor tiles.
– Clean application on all surfaces – also when using pins
– Vials to adjust the device
Completely read through the operating instructions,
the „Warranty and Additional Information“ booklet as
well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.This document must be kept in a safe place
and if the laser device is passed on, this document must
be passed on with it.
!
Safety instructions
Using class 2 lasers
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.
Summary of Contents for SuperSquare-Laser 2G
Page 62: ...62...
Page 63: ...SuperSquare Laser 2G 63...
