06
Function / application
Variable crank tripod with adapter for mounting devices with 1/4" and 5/8"
thread. Thanks to the special rubber-steel combination tips the tripod can be
easily adapted to different surfaces.
Completely read through the operating instructions as well as the latest
information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a
safe place and passed on together with the device.
!
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
– Take care not to pinch your fingers when folding the tripod into
transport position.
– Do not set up the tripod on unsecured roads: risk of accident.
General safety instructions
– Avoid moisture and sand, clean thoroughly after use.
– Set up the tripod as perpendicular as possible on firm ground:
risk of toppling.
– Align to centre of gravity: risk of toppling.
– Under unfavourable wind conditions, an additional weight can be attached
to stabilise the tripod (not included in scope of delivery).
– Only use suitable instruments with 1/4“ or 5/8“ connection up to
the maximum load capacity.
– Before transporting or storing, instruments must be removed from
the tripod and the tripod folded into the transport position.
Instructions for use
1
Mount for thread
adapter
2
Centre column
3
Adjustment of
the centre tripod
column
Device description
(see Fig. A,
page 02)
4
Crank height adjustment
5
Fixing the centre column
6
Quick-release lock for
adjusting the tripod legs
7
Locking screw
for fixing the tripod legs
EN
8
Rubber-steel tips
9
5/8“ thread adapter
10
1/4“ thread adapter
