Monitored Maglock Instruction Manual
CEB00XXX-53-000
Page 5 of 8
Issue 2 13 January 2020
3.1 Mounting
STEP 1
•
Fold template along dotted line.
•
Place template against door and head frame.
•
Drill holes as indicated on template.
STEP 2
•
Mount the armature plate to the door using one (1) rubber washer sandwiched between
two (2) steel washers.
STEP 3
•
Install the mounting plate.
•
Adjust the mounting plate so that it and the armature plate form a right angle.
•
Using the mounting plate as a template, drill the wire hole.
•
Drill and install the remaining mounting screws.
STEP4
•
Fix the magnet to mounting plate with two m4 (m6) screws supplied.
STEP 5
•
Install electrical wiring per instructions.
STEP 6
•
Test all functions of this model (see wiring)
Mounting the Maglock