Manual: MicroNet Slim - Network Interface
page 4 / 20
1. Scope of delivery & details
Please check if all listed parts are included and undamaged. Included in delivery:
1 x Network interface
1 x power cable
1 x manual
1 x micro-SD card
3. Initial operations, safety instructions
1. Make sure to use
correct voltage
; see in-
formation in this manual.
2. Installation has to be done by
technical
experienced and qualified persons
ac-
cording to safety regulations of the res-
pective country.
3. If the network interface has been expo-
sed to
great temperature changes
, do
not switch it on immediately. Conden-
sation water may damage the network
interface.
4. Never use dimmer, RC or other electroni-
cally switched sockets. Whenever possi-
ble, do not use the network interface to-
gether with large appliances (especially
fog machines) on the same mains!
5. Ensure
sufficient ventilation
and do not
place the network interface on any warm
or heat radiating surface.
2. Preliminary warning notices
1. Please use the network interface only
according to these instructions
.
2. Do not use the network interface if there are any
visible damages
.
3.
Do not operate the network interface at high humidity, in rain or in
dusty environments.
4.
Protect the network interface against dripping or splashing water.
