Manual: MicroNet Slim - Network Interface
page 8 / 20
DMX settings
channel range
function
10
80-95
Pattern completely magenta
96-111
Pattern completely cyan
112-127 Pattern completely white
128-255 Rainbow effect
11
0-31
Default scan speed (200 points per second)
32-255
Manual selection of scanspeed (5000 - 30000 points per second)
Attention: make sure not to overload the scanners of the laser projector! If
you‘re unsure about the maximum scanspeed of your laser projector, stay with
the default setting.
5.3 Stand-Alone Mode
Dip switch setting
switch
1
2
3
4
5
6
7
8
9
10
On (1) / Off (0) 0
0
0
0
1
0
0
0
1
0
In the stand-alone mode, the laser patterns are triggered automatically, even without music.
5.4 Micro-SD Card Mode
Dip switch setting
switch
1
2
3
4
5
6
7
8
9
10
On (1) / Off (0) 0
0
0
0
0
1
0
1
0
0
In the SD card mode, the ILDA interface plays the laser show files stored on a microSD card in
an endless loop.
5.5 Network mode
Important:
If you want to use a lasershow software, make sure that there is no firewall which blocks net-
work traffic between your computer and the laser projector. The firewall has to be configured
to grant network access to the lasershow software. If the network connection does not work,
try to temporarily disable the firewall. If this helps, you can create a matching rule and re-
activate the firewall. Whenever the DIP switch settings for the network mode are changed (for
example, change static IP address or switch from DHCP to AutoIP mode), the ILDA interface
(resp. the laser projector) has to be restarted (switch power off and on).
