LASIAN BIOSELF, User And Installation Manual

COD. 79101EN.00 

11/2013 

9 

1. IMPORTANT INSTRUCTIONS 

This instruction manual has been prepared by the manufacturer and it is an essential part of the product. Should 
the boiler be sold or transferred, it should always be accompanied by the manual as it contains information that is 
necessary for the buyer and all persons involved in the installation, maintenance and use of the product.

Carefully read and understand the instructions and technical information contained in this manual before 
proceeding with the installation, use and maintenance of the product. Familiarization of the instructions in this 
manual ensures the safety of people and a longer life performance of the product. 
The manufacturer disclaims any liability for damage caused by failure to read the rules and instructions for 
installation, use and maintenance listed in the book of instructions, unauthorized product modification or use of 
non-original spares.  

Installation and use of the product should be in accordance with the manufacturer's instructions, obeying European, 
national and local regulations. 
Installation, electrical connection, maintenance and repairs must be performed only by a qualified, authorized 
person and with a proper knowledge of the product. 
The product should not be installed near wooden walls or combustible material. For a proper installation it is 
necessary to consult the chapter "Safety distance". Check the flatness of the floor where the product will be 
installed. Use of appropriate gloves is advised when handling coated parts to avoid leaving traces that are difficult 
to remove in the first cleaning. The assembly of the boiler should be carried by at least two people. 
Connect the boiler to the mains only after connecting the chimney. The power cable must be accessible after the 
installation of the boiler. To start the boiler refer to chapter "FUEL". Never use liquid fuels to start the boiler.  
Provide sufficient ventilation during the installation. In case of malfunction, the fuel supply will be interrupted. 
Restart the product only after having the cause of the problem solved. Stop using the product in case of failure or 
malfunction. Do not lift the grating which lies inside the fuel hopper. Any accumulation of unburned fuel in the 
burner resulting from misfire must be removed before ignition.  
While the boiler is working, it is recommended not to touch the hottest parts like handle, door and chimney. Pay 
attention to keep anyone not involved in the installation away from the boiler. Inform persons in the vicinity of the 
boiler of the necessary precautions while the product and possible products are working. In case of problems or 
misunderstandings of the instructions, contact the installer. Do not place non heat-resistant objects on the boiler or 
within the prescribed minimum safety radius of the boiler. 

Do not open the door during operation, or start the boiler if the peephole glass is broken. 
For terms, limits and exclusions refer to the warranty certificate supplied with the product. The manufacturer may 
make changes deemed appropriate to the boiler documentation without notice, to pursue a policy of constant 
development and constant renewal of the product. 
This document is property of the manufacturer and can not be transferred in whole or in part to any third party 
without the written consent of the company. All rights

reserved. 

DIRECTIVES AND STANDARDS 

All our products are manufactured according to the following directives: 

89/366 CEE 
2004/108 CE 
2006/95 CE 
89/106 CEE 
 
All our products are manufactured according to the following standards: 

EN 60335-1; EN 60335-2-102; 
EN 61000-3-2; EN 61000-3-3; 
EN 50366; EN 55014-1; 55014-2 
EN 303-5