Trencher TR 120 H
20
no case against mechanical damage, fall etc. The protective foil is recyclable;
dispose it according to valid local regulations.
-
While putting the machine aside (e.g. at reloading), we recommend to place it
under a shelter.
-
While unloading, put the product always on a solid and level surface.
-
It is not allowed to put it on a labile base.
-
It is not allowed to put any objects or tools on the machine or to pile two
machines on each other.
Handling
After delivery unload the machine from the transport pallet as follows:
-
Cut the binding band carefully. Be aware, the band is tightened up and after
cutting its both ends may 'shoot out'. While cutting the band, use protective
gloves and goggles.
-
Remove the chocks from the tracks.
-
Fill the fuel tank, connect the battery, check up the oil engine level and try to
start the engine.
-
Lift up the chain bar.
-
Put the chocks to the pallet in the required direction and in spacing of the
required wheel track.
-
Keep free space around the pallet for going down. Be aware of potential
insufficient de-aeration of the hydraulics. It might cause unwished motion
while going down.
-
Be aware while the machine leaves the pallet – it may shortly accelerate.
Precautions in Design
This machine is provided with
safety guards protecting
against any contact with
rotating parts (hit and pull-in
hazard) and against hot parts
(exhaust manifold). The
guards are fixed, bolted down
and solid; only the guard over
the exhaust manifold is
Summary of Contents for TRENCHER TR 120H
