7.5 P-4 Electronic keys
7 PROGRAMMING OF ENTRY PHONE
in which the deleted key was recorded.
P-4-5
LdEl (U)
Resetting the key attributed to the apartment.
4
5
6
3
C
CELL
NUMBER
IN MEMORY
APARTMENT
NUMBER
Key resetting procedures:
start program P-4-5. On the display message LdEl will appear.
Give the apartment number and confirm it with key KEY . Entry phone will
search the first memory item in which key number attributed to the selected
apartment is recorded
If the key has been located, on the display the following messages will appear
successively P and xx where xx is a number which defines number of memory
cell in which key number was saved.
To reset the key select key C . On the display message CAS will appear for
a moment. Entry phone will start searching next keys.
Use key KEY . to pass to the next item. If in the next few seconds none key is
used, the entry phone will search automatically the next key attributed to the
selected apartment number.
As soon as the whole base is searched message End will be displayed. End
P-4-6
PdEl (U)
Resetting key recorded in the defined item.
Procedure is used for key resetting after having given the memory item in which
4
6
CELL
NUMBER
IN MEMORY
6
3
the key was recorded. After starting the procedure on the display a message P—
will appear. After memory item is given and after confirming with key KEY the
key number will be deleted, which will be confirmed by message CAS . If given
item is free on the display message FrEE will be shown.
P-4-7
Id
(U)
Key identification.
Procedure is used for key identification. After applying the key to the reader on
the display an information will appear in which item it will be recorded P - x and to
which apartment it is attributed: L - x , (if it is not attributed L - 0 ). If identified
37