7.6 P-5 Individual settings
7 PROGRAMMING OF ENTRY PHONE
Parameter No. 6. Options of combination lock, key 6
This parameter defines the operation of combination lock.
E — Combination lock activated, occupant may change the code and register
electronic keys.
– — Combination lock switched off.
A — Combination lock activated, occupant can neither change the code or
register electronic keys.
Copying of settings
Entry phone CD-3100 enables copying the selected set of
settings to group of numbers which is defined by a number range from the lowest
number (LLO) to the highest (LHI). The logical range of numbers should be given
(taking into account number shifting or hotel numbering).
Copying of settings is realized as follows:
start procedure P5 and give ”0” as a number of apartment (see dwg. 22)
using keys 1-6 set, according to the above instruction, the desired combination
of individual settings.
selected settings should be confirmed with a KEY symbol. On the display
message [CPY] will appear for a moment and then horizontal bars (see dwg.
23).
give the code of an installing specialist. This a security against an accidental
copying of settings.
give the lowest number from the number range to which the settings will be
copied (LLO).
give the highest number of his range (LHI) and confirm with a key KEY
on the screen fast changing digits will appear informing about copying of set-
tings.
5
0
Figure 22: Copying of settings - starting the procedure
Installing
specialist`s
code
1 2 3 4
1
Range
down
Range
up
Figure 23: Copying of settings - selection of number ranges
40
