7
SETTING THE DISPLAY FORMAT
SETTING THE TIME
It is recommended that during initial installation you manually set the time and date. The
1500E will automatically correct itself when it receives a radio signal from the atomic clock.
Example: Change the time from 10:08 to 10:09.
Press the SELECT button and position
the " " mark at the "TIME".
At that moment, the "Hour" flashes. (The
flashing means it can be changed.)
Change the "Hour".
In case of the example, press the SET
button because the hour is not to be
changed.
At that moment, the flashing changes
from "Hour" to "Minute".
S
tep
1
TIME
SELECT
CHANGE
SET
Change the "Minute".
Press the CHANGE button to set at "09",
and then press the SET button.
At that moment, the "Second" starts to
run from "00".
S
tep
2
TIME
SELECT
CHANGE
SET
SELECT
CHANGE
SET
TIME
After you finish setting the time, press
the SET button once again.
Now the time setting has been
completed. Replace the cover and lock.
IMPORTANT: If you do not complete
Step 3, the clock will not print.
S
tep
3
TU
WE
TH
FR
SA
SU
MO
Second
Hour
Minute
ENGLISH
9
Summary of Contents for 1500E
Page 1: ...Lathem Time Corporation ENGLISH 1...
Page 36: ...36 Q7150 6120 2...
