2000 – 4000 Series Time Recorder User’s Guide
Page
12
Changing the Motor
Figure 10
1.
Unplug cord from wall outlet (except 2100BATT).
2.
Remove type section from main frame (see “Replacing the Type
Section”).
3.
Figure 10
shows a close-up of cam block terminal.
4.
Disconnect
Motor Wire Leads – Figure 10, 10.1
by turning
each
Screw – 10.2
one-quarter of a turn counterclockwise.
5.
Remove the
Motor Clutch – Figure 10, 10.3
from its shaft.
The shaft has LEFT HAND threads – remove clutch by turning
clockwise.
6.
Hold
Motor Bracket – Figure 10, 10.4
and loosen
Motor
Mounting Screws – Figure 10, 10.5
. Remove and retain screws
and bracket from old motor.
7.
Install motor clutch on new motor. Turn counterclockwise to
tighten. DO NOT OVERTIGHTEN OR BEND – YOU MAY DAMAGE
INTERNAL MOTOR GEARS.
8.
Install new motor.
9.
Install the new motor wire leads into the cam block terminal
–
Figure 10, 10.1
by turning each
Screw – 10.2
one-quarter of a
turn clockwise.
10.
Plug cord back in wall outlet, and reset the time.
2000 – 4000 Series Time Recorder User’s Guide
Page 1
Ordering Accessories
Lathem time recorders fulfill a wide range of timekeeping
requirements. For maximum results, only use Lathem accessories
specifically designed to fit your time recorder.
To purchase the appropriate accessories for your time recorder,
contact your local Lathem dealer or visit:
http://shop.lathem.com
Description
Part
Number
Extra Pair of Keys
VSM0976
Replacement Ribbon, 2-Colors
7-2CN
Time Card Rack, 25 Capacity, 9” Card, Black, Plastic, Expanding
25-9EX
Time Card Rack, 12 Capacity, 9” Card, Black, Plastic, Expanding
12-9EX
Time Cards, Weekly (Box of 1,000)
1900L-C
Time Cards, Bi-Weekly (Box of 1,000)
L-31-1D
Time Cards, Semi-Monthly / Monthly (Box of 1,000)
1790
Time Cards, Job Costing (Box of 1,000)
350
Replacement Timing Motor, 110V/60Hz
K342
* For additional information on Lathem’s powerful employer software
solutions or to download an evaluation copy of these applications
visit us online at http://www.lathem.com.
