14
•
Add the Terminal
Add the Terminal
After setting up the FaceIN add it to your PayClock system. Once the
terminal is added to the PayClock system employees can be added.
After adding the employees update the terminal and the employee
face’s can be enrolled.
Add the terminal in PayClock
The Maintenance button group under the Terminal Manager tab is
used to add or delete FaceIN terminals that are connected to the
PayClock system.
How do I add a FaceIN terminal?
•
Open PayClock and select the Terminal Manager tab on the
ribbon bar.
•
Click the Add Terminal button. The Select Terminal Type
window will open.
•
Select FaceIN from the drop down list and click OK.
•
The FaceIN terminal properties will display on the right.
•
From the Connection tab enter the name for the terminal
under Device Nickname.
•
Enter the terminals IP Address in the IP Address field; this is
the address that was set up for the terminal at the FaceIN
terminal.
•
Click
Save.
•
Click the Test Connection button to verify communications
with the FaceIN terminal.