13
TRANSMITTER LED CODES
LED Color / Pattern
Name
Notes
Solid green
Normal Driving Mode
See page 11 for information on how to use the transmitter controls.
Slow red
(0.5 sec on / 0.5 sec off)
Binding
See page 12 for more information on binding.
Flashing medium red
(0.25 sec on / 0.25 sec off)
Low Battery Alarm
Put new batteries in the transmitter. See page 7 for
more information.
Flashing fast red
(0.125 sec on / 0.125 sec off)
Link Failure / Error
Transmitter and receiver are no longer bound. Turn the system off
and then back on to resume normal operation. Find source of the
link failure (i.e., out of range, low batteries, damaged antenna).
RECEIVER LED CODES
LED Color / Pattern
Name
Notes
Solid green
Normal Driving Mode
See page 11 for information on how to use your transmitter
controls.
Slow red
(0.5 sec on / 0.5 sec off)
Binding
See page 12 for more information on binding.
Flashing fast red
(0.125 sec on / 0.125 sec off)
Failsafe /
Low-Voltage Detect
Consistent low voltage in the receiver triggers failsafe so that there
is enough power to center the throttle servo before it completely
loses power.
THE 2.4GHz RADIO SYSTEM
