background image

3

Technical support is available Monday through Friday 
from 8:30am to 9:00pm central time. Technical assistance 
is also available at LaTrax.com. You may also e-mail 
customer support with your question at support@LaTrax.
com. Join thousands of registered members in our online 
community at LaTrax.com.
LaTrax offers a full-service, on-site repair facility to handle 
any of your service needs. Maintenance and replacement 
parts may be purchased directly from LaTrax by phone 
or online at LaTrax.com. You can save time, along with 
shipping and handling costs, by purchasing replacement 
parts from your local dealer.
Do not hesitate to contact us with any of your product 
support needs. We want you to be thoroughly satisfied 
with your new model!

SAFETY PRECAUTIONS

We want you to safely enjoy your new model. Operate 

your model sensibly and with care, and it will be exciting, 

safe, and fun for you and those around you. Failure to 

operate your model in a safe and responsible manner 

may result in property damage and serious injury. The 

precautions outlined in this manual should be strictly 

followed to help ensure safe operation. You alone must 

see that the instructions are followed and the precautions 
are adhered to. 

Important Points to Remember

•  Your model is not intended for use on public roads or 

congested areas where its operation can conflict with or 
disrupt pedestrian or vehicular traffic.

•  Never, under any circumstances, operate the model in 

crowds of people. Your model is fast and could cause 
injury if allowed to collide with anyone.

•  Because your model is controlled by radio, it is subject 

to radio interference from many sources that are 
beyond your control. Since radio interference can cause 
momentary losses of radio control, always allow a safety 

margin in all directions around the model in order to 
prevent collisions. 

•  The motor and battery can become hot during use.  

Be careful to avoid getting burned.  

•  Don’t operate your model at night, or anytime your line 

of sight to the model may be obstructed or impaired in 
any way.

•  Most importantly, use good common sense at all times.

Speed Control

• 

Disconnect the Battery:

 Always disconnect the battery 

from the model when not in use. 

• 

Transmitter on First:

 Switch on your transmitter first 

before switching on the speed control to prevent 
runaways and erratic performance.

• 

Don’t Get Burned:

 The motor can become extremely 

hot during use, so be careful not to touch it until it is 
cool. Make sure there is adequate airflow to the motor.

• 

Use the Factory-Installed Connectors:

 Do not change 

the battery connector. Improper wiring can cause fire or 
damage to the ESC. Please note that modified speed 
controls can be subject to a rewiring fee when returned 
for service.

• 

Insulate the Wires:

 Always insulate exposed or damaged 

wiring with heat shrink tubing to prevent short circuits.

• 

No Reverse Voltage:

 The speed control is not protected 

against reverse polarity voltage. When changing the 
battery, be sure to install the same type of connectors 
to avoid reverse polarity damage to the speed control. 
Removing the battery connectors on the speed control 
or using the same-gender connectors on the speed 
control will void the product’s warranty.

• 

No Schottky Diodes:

 External Schottky diodes are 

not compatible with reversing speed controls. Using a 
Schottky diode will damage the ESC and void the 30-
day warranty.

Recycling Your NiMH Battery

It is strongly recommended that you recycle the vehicle 
battery when it has reached the end of its useful life. 

Do 

not throw your battery in the trash.

 To find a recycling 

center near you, ask your local hobby dealer or visit  
www.call2recycle.org.

INTRODUCTION

All instructions and precautions outlined in 

this manual should be strictly followed to 

ensure safe operation of your model. This model is 

not intended for use by children under 14 years of 

age without the supervision of a responsible and 

knowledgeable adult.

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses, and can radiate 
radio frequency energy, and, if not operated in accordance with the instructions, may cause harmful interference to radio communications. The user is cautioned that changes or 
modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the 
following two conditions: This device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a 
minimum distance of 20 centimeters between the radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or transmitter.

TQ Radio System 
Operation Frequency: 

 2406~2453 MHz 

Maximum Radio Frequency Power:

  Maximum Peak Power -1 dBm

Traxxas iD Battery Connector 
Operation Frequency:

 13.56 MHz 

Maximum Radio Frequency Power:

  Maximum Peak Power -29.27 dBuA/m @ 10m

Summary of Contents for Valentino Rossi THE DOCTOR RALLY VR46...




















Reviews: