MDP Based Key Phrase Detection Demonstration
User Guide
© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
. All other brand or product names are
trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02048-1.0
9
Figure 4.3. Filter Bank Coefficient File Settings
10.
In the main interface, click
Program Device
to program the bitstream file FilterBank.bin.
11.
To program the binary firmware file, select the options below as shown in
a.
Under Programming Options, select the binary file
Phrase_Detection_Firmware.bin
in Programming file
b.
Click
Load from File
to update the Data file size (Bytes) value. The default data file size does NOT default to
20016. Manually change the value to
20016
.
c.
Ensure that the following addresses are correct:
Start Address (Hex):
0x00030000
End Address (Hex):
0x00040000
d.
Click
OK
.
