07/2021
Versafreeze Freezer Cabinets
9 / 44
Under table installation (only applies for VF 15040 and VF 15085)
The cover panel on the deep-freeze appliance must be removed prior to installation under a tabletop. When the appliance
door is open, you can reach the screw connection for the cover by inserting a Phillips screwdriver through the opening on
the right side of the upper housing frame. After loosening the screw, pull the cover panel approx. 2 cm forward and then
lift from the appliance.
Please refer to the illustration below for the minimum dimensions for under table installation.
Before the appliance is moved to its place of installation, the electrical system (see point 5 of these instructions) and, if
necessary, the alarm system (see point 8.5) must be connected. Ensure that the connection cable is not damaged when
the freezer appliance is moved.
Summary of Contents for Versafreeze VF 15040
