COMPUTER INSTRUCTION
CLASS-A MOTORIZED
COMPUTER OPERATION MANUAL
FUNCTION
：
1.Program
：
21programs as following
A
：
1 Manual Program
B
：
10 preset Program Profile
：
P1
：
ROLLING P2
：
VALLEY P3
：
FATBURN P4
：
RAMP
P5
：
MOUNTAIN P6
：
INTERVAL P7
：
CARDIO P8
：
ENDURANCE
P9
：
SLOPE P10
：
RALLY
C
：
1 Watt Control Program
D
：
4 Heart Rate Control Program
：
55%H.R 75%H.R 90%H.R and TARGET H.R
E
：
4 User Setting Programs
：
CUSTOM1 to CUSTOM4
F
：
1 Boby Fat Measuring Program
2.Record the user’s data of GENDER HEIGHT WEIGHT and AGE even cut off the power.
3.Dot matrix display showing your current status.
4.Simulative ECG measuring the heart rate
5.Display Speed(RPM) TIME DIST CAL WATT PULSE LEVEL at the same time.
6.The computer will turn off automatically if there is no operation speed signal and pulse signal
over 4 minutes. Meanwhile it will store your current exercise data and turn the loading resistance
to the minimum.Once you press any button or in motion.the computer will turn on automatically.
BUTTONS
：
１
ENTER
●
In “stop”
mode (display STOP) press ENTER button to enter into program selection and setting
value which flash in related window.
A
：
When you choose the program press Enter to confirm the one you like.
B
：
When in setting press ENTER to confirm the value that you would like to preset.
●
During the start mode (display START) press ENTER to choose display the speed or RPM or
11
