background image

SAFETY INSTRUCTION                                             

 

 

Before you start training on your home Elliptical Trainer, please 
read the instructions carefully. Be sure to keep the instructions for 
information, in case of repair and for spare pare delivery. 

 

 

 

This 

elliptical trainer

 is made for home use only and tested up to 

a maximum body weight of 150 kg.

 

 

 

Follow the steps of the assembly instructions carefully.

 

 

 

For assembly use only suitable tools and asks for assistance with 
assembly if necessary.

 

 

 

Check before the first training and every 1-2 month that all 
connecting elements are tight fitting and are in the correct 
condition. Replace defective components immediately and/ or 
keep the equipment out of use until repair. For repairs, use only 
original parts.

 

 

 

In case of repair, please ask your dealer for advice.

 

 

 

Avoid the use of aggressive detergents when cleaning the home 
exerciser.

 

 

 

Ensure that training starts only after correct assembly and 
inspection of the item.

 

 

 

For all adjustable parts be aware of the maximum positions to 
which they can be adjusted/tightened to.

 

 

 

The home exerciser is designed for adults. Please ensure that 
children use it only under the supervision of an adult.

 

 

 

 

2

Summary of Contents for PROSPORT XPC 700






















Reviews: