background image

EN

10

EN

 General Information, Maintenance Instructions

General comments on operation and use

For your safety bathtub temperature should not 

exceed 40°C.

Let water out after each bath. Never leave children in 

the tub unsupervised.

Use
Beware!

Increased risk of slipping when surface is wet. This is 

particularly so when using soap, shampoo, bath oil, 

etc.

Maintenance instructions 

The surface is simple to clean and maintain. The 

smooth surface hardly collects dirt. Regular care: 

Sponge, soft cloth, somewhat antistatic cleaning 

agent. The tub will thus retain its gloss and reject dirt. 

To clean your massage tub, please use a soft sponge, 

liquid soap and water. Rub dry with a dry cloth. 

Avoid the use of abrasives or solvents which damage 

the surface of the tub.

After long contact periods, several substances like ink, 

cosmetics and dyes may leave colouring stains. Lit 

cigarettes can leave burning rings.

These stains and spots as well as scratches or other 

small damages can be removed following the recom-

modations below:

Remove heavy dirt with liquid household cleaner e.g. 

dishwash detergents or liquid soap (observe dilution 

instructions). 

Remove lime marks with a decalcifier. Always rinse 

with plenty of clean water. Give a final polish with a soft 

cloth. Use no acid cleaning agents or cleaning vinegar. 

Damage

  

Scratched surfaces should always be treated by a 

specialist. Serious damages can be repaired with the 

maintenance kit (2.9996.4.000.000.1). Mix filler and 

catalyst to a complete dispersion of liquid substance. 

Apply the filler on the damaged part and let it cure for 

at least 12 hours at minimum 15°C.

Rub the cured filler with a 220 grain glass-paper and 

also the part around to eliminate any non-homogene-

ous parts. Clean the surface as described above.

Damage resulting from inappropriate treatment 

by the user will not be covered by our guarantee.

 

EN

  Important safety instructions - Instructions pertaining to a risk of fire, electric shock or in jury to persons

  

Read and follow all instructions!

WARNING:

 Risk of personal injury. Do not permit 

children to use this unit without adult supervision.

WARNING:

 Risk of personal injury. Do not operate this 

unit without the guard over the suction fitting.

WARNING:

 Risk of hyperthermia and possible drown-

ing. People using medications and/or having adverse 

medical history should consult a physician before using 

this product.

WARNING:

 Risk of personal injury. Do not overfill unit 

before entering. Entering tub when filled more than 2/3 

can cause overflow and slippery conditions. Exercise 

caution when entering and exiting.

WARNING:

 No food or alcoholic beverages. Use of 

your bathtub immediately after meals is not recom-

mended. Avoid alcohol consumption before or during 

bathing. Alcoholic beverages can cause drowsiness 

or hyperthermia resulting in loss of consciousness or 

even drowning.

WARNING

: Risk of personal injury. Do not use any 

electronical devise as shaver, hair dryer, curling iron, 

ect. while taking a bath. There is a danger of being 

electrocuted.

WARNING:

 Pregnancy. If you are or think you may 

be pregnant, consult your physician before using the 

bathtub.

Never drop or insert any object into any opening.

Use this unit only for its intended use as described 

in this manual. Do not use any plumbing devices not 

recommended by American Standard.

SAVE THESE INSTRUCTIONS

Summary of Contents for ALESSI 2.4597.2.000.000.A













Reviews: