EN
2
EN
General installation instructions
User manual
Protection from damage
Instructions for use
These instructions for use must be
carefully read before installation.
Check on content of delivery and condition of the
components
Check delivery after receipt for completeness and
possibly damage (see parts list on page
4). Inform the
dealer immediately when damage is apparent. We are
not liable for damage arising during or after installation/
fitting.
Check door width before starting work
Does the bath pass trough the door of the room in
which the bath will be installed? Required minimum
door width: See dimensions page 3.
Lifting/moving
The bath must only be lifted/moved using the transport
straps provided - never use the hoses or installation
parts.
Laying circuits
Do not lay any circuits under the bath.
Use suitable protective covers to prevent damage to
surfaces and blockages by dirt or dust arising during
fitting.
Cover sensitive components (drain) temporarily
with a protective cover before starting the installation/
fitting.
Special precautions
When cleaning the tiles, make sure that no ammoniac
or a similar aggressive cleaning agent come into
contact with the installed parts.
Water connection through the overflow.
This connection must absolutely be effected by a
qualified specialist.
After connecting the water supply and drainage
pipes, the tub must be examined to ensure that it is
waterproof.
Changes allowed:
Laufen reserves the right to
make changes or modifications on any of its products
without notice.
