Page 4
User Instructions
Universal Slider Action Solenoid S.1
V2.0
– HW rev. 15 – SW rev. 1.7
Aug. Laukhuff GmbH & Co. KG August-Laukhuff-Straße 1 D-97990 Weikersheim
Telephone: +49 7934/9160-0 Fax: +49 7934/616 E-Mail: info@laukhuff.de
www.laukhuff.de
Feature 3: MODE (A)
The slider action solenoid has different operating modes for different applications
Mode 1
Mode 2
Mode 3
Mode 4
RS- Modd
RS-Modus
inverted
RS-Mode without IP
RS-Mode without IP
inverted
Mode 5
Mode 6
Mode 7
Mode 8
ON-OFF mode
ON-OFF mode
inverted
ON-OFF mode without
current feed when end
position is reached
ON-OFF mode without
current feed when end
position is reached
inverted
IP = Initial Positioning (for dual action)
The standard modes (with initial positioning) position the sliders upon activation. If, for example, the organ
is switched on with the stop switch engaged, the slider is moved to ON position irrespective of its current
position
The modes without initial positioning function do
not
position the sliders upon activation. If, for example,
the organ is switched on with disengaged stop switch and a slider is in ON position, the slider remains
where it is.
Should you discover after mounting the magnets, that the sliders operate in the oposite direction, it is very
easy to invert the operating direction of the slider magnet.
LED 8 off
normal direction of movement (on / off as indicated on the control board)
LED 8 on
inverted direction of movement
When the direction is inverted, the magnet moves to the indicated OFF-position when the control signal is
activated.
