62
LAUNCH
X-431 PAD V
User's Manual
No.
Name
Description
1
BNC to 4mm Test
Leads
Test lead of a male BNC connector to (2)
4mm connectors. It is a kind of special line
for assisting automobile Scopebox to test
various types of signals. 4mm connectors
are coded in two colors: black (earth
wire) and red (positive pole which should
be connected with the 6-way Breakout
Leads). Moreover, it can also work with
the 20:1 Attenuator.
2
6-way Breakout
Leads
Each lead has 6 blades wired to 6 sockets,
allowing you to insert it between a plug
and socket pair, other ends are 6 (4 mm)
sockets which can be connected to the
BNC to 4mm Test Lead.
With these 6-way leads, you will be able to
test most of the sensors and actuators on
all makes and models of vehicle, including
MAP, temperature, throttle position and
airflow sensors, fuel pumps, primary
ignition circuits and fuel injectors.
3
Data Cable
Connects the Scopebox and diagnostic
tool
so that the sampled signal can be
displayed on the diagnostic tool.
4
Power adapter
To supply power to the Scopebox through
connection to AC outlet.
5
Battery clamps
cable
To supply power to the Scopebox through
connection to vehicle's battery.
6
20:1 Attenuator
It allows the Scopebox to measure fuel
injector and primary ignition waveforms.
*Note: Please note this attenuator
should be not used for any high voltage
measurements other than fuel injectors
and primary ignition.
