72
LAUNCH
X-431 PAD V
User's Manual
Fig. 7-34
*Note: If no desired channel is selected, the system will take the current
source as the default channel.
<3> Clear measure
Tap
and then [Clear Measure], the system will clear the
measurement result on screen.
7.3.4.5 File management
<1> Save snapshot
While viewing sampling data, tap
and then [Save Snapshot] to
store the current screen.
<2> Snapshot manager
While viewing sampling data, tap
and then [Snapshot Manager] to
enter. View, delete and edit operations are supported.
<3> Record waveform
This function is used to record input waveforms that are acquired by
the Scopebox at a specific period, and save it as waveform file which
can be recalled in future.
It can be performed only when the Scopebox is collecting data in
Normal mode.
Tap
, then select [Record] from the pop-up menu to start recording.
Fig. 7-35
Tap [Start] to start recording with a minimum record length of 10
frames, and [Stop] to stop recording. While recording, the recorded
pages will be shown on the screen.
<4> Load waveform for playback
The Import function enables you to import the stored waveform file for
playback and review. During replaying, the Scopebox stops collecting
data automatically.
Tap
, then select [Waveform replay] from the pop-up menu to enter:
