LAUNCH
X-431 PAD V
User's Manual
83
Viewable Angle
60
o
Lens Focal Length
More than 50mm
Net Weight
Approx. 270g
7.5.4 Connections & Operations
1. Insert the data cable into the data I/O port of port of the diagnostic
tool.
2. Bend the neck of the flexible tube as desired and extend the
camera with adjustable LED lights to some unseen or unreachable
parts of engine, hydraulic system, nozzles etc.
3. After connections are properly made, press the [
POWER
] button
on the tablet to turn it on. Wait until the system enters the Home
screen.
4. Tap "Maximus 3.0" to launch it. Switch to the "Toolbox" module, tap
"Applications" -> "Videoscope" to run it, then the screen will display
the scene captured from the videoscope camera.
5. Adjust it until the lens stops in the desired place, then use the
dial
for LED light brightness
to adjust the brightness.
6. Press the
Snapshot
button on the videoscope to take a photo.
Alternatively, you can also press the
Snapshot
button on the tablet
to take photos.
To record a video, switch from Camera mode to Video mode and
tap the
Record
button on the screen to start recording.
Images are captured in .jpg format and videos are recorded in .avi or
.mp4 format. All photographings and videos are saved in DCIM folder
where users can browse and replay it.
