LAUNCH
KWB-511 Wheel Balancer user’s manual
6
Press
to choose parameter, and press
to modify parameter value. After inputting the parameter press
to
save and enter next parameter input state. In the state of D value input, press
to convert mm and inch.
4. Choose balance modes
The default mode of this equipment is standard dynamic mode. Choose other mode by pressing keys DYN/STA
、
ALU
、
MOT
(See Fig 9).
OPT mode can be operated by pressing the key OPT under dynamic and static modes.
Press STOP can stop measurement during measurement
Fig9
In ALUS mode
mm
inch
Fig8
