LAUNCH
X-431 Torque LINK User Manual
16
and then tighten the captive screws.
B. Non-OBD II Vehicle Connection: For vehicles with non-OBD II diagnostic
socket, a non-16pin adaptor cable (not included) is required. Follow the
illustration below to proceed:
*Note: If the power supply on vehicle diagnostic socket is insufficient or the power pin
is damaged, you can get power via either of the following ways:
A. Via Battery clamps cable (optional): Connect one end of the battery clamps cable to
the power jack of the OBD I adaptor box, and the other end to the vehicle’s battery.
B. Via Cigarette lighter cable (optional): Connect one end of the cigarette lighter cable
to the power jack of the OBD I adaptor box, and the other end to the cigarette
lighter receptacle.
4.4 Communication Setup
After the VCI device is successfully activated and powered on, the VCI device
will pair with the tablet automatically. Users have no need to make any setting
any more.
Once the communication failure occurs, the diagnostic app will pop up some
prompt information. In this case, just follow the on-screen prompts to
troubleshoot all possible causes.
