Launch X-631, Installation & Parts Manual

LAUNCH                                     

X-631/X-631+

Installation and Parts Manual                      Unpacking

2

Unpacking 

X-631/X-631+ is delivered to the customers in two cartons: a cabinet box and an accessory box. 

Remove Cabinet Box 

The cabinet box is 690mm×726mm×1295mm in size. There is a PC set (including host computer and monitor), keyboard, 
mouse, RF main emitter and receiver box etc.

The cabinet is placed on the paper base. Foam is on the two sides and the 

up side of the cabinet wrapped with a paper ridging box fixed by package strip. 

Fig.1.1 

Unpacking procedures: 

z

Loosen all the package strips by a pair of scissors. 

z

Remove the up side of the cabinet and take out the foam beside it. 

z

Remove the cabinet from the paper base. Now you can debug the PC set.   

Note: Keep the package box and packing materials for future use. 

Remove the Accessory Box 

The accessory box is 999mm×963mm×970mm. It contains a printer, a sound box, a wheel clamp bracket, two probe rods, a 
steering wheel holder, a brake pedal depressor and two mechanical turntables. In the paper package box, the honeycomb 
paper wraps the panel and the multilayer paper is on the four corners.

Fig.1.2 

Unpacking procedures: 

z

Loosen all the package strips by a pair of scissors. 

z

Remove the cover of the box, the multilayer on the four corners and the board around. 

z

Take out the filling paper on the up side of the box. 

z

Take out the packing box of the printer. 

z

Take out the steering wheel holder and the brake pedal depressor. 

z

Take out two packing boxes of the two probe rods. 

z

Take out the packing box of the four wheel clamps.