LAUNCH
X-631/X-631+
Installation and Parts Manual Installation and Adjustment
3
Installation and Adjustment
Install the Main Unit
z
Place the cabinet to a suitable place and leave enough space for installation. Open the drawer and you can see the
User’s Manual, Parts Manual, Packing List, etc. Please keep them well.
z
Place the mouse and the keyboard on the keyboard drawer. Lead the cables respectively to the computer.
z
Unpack the packing box of the monitor, place the related materials well and install the monitor. Lead the cable to the
computer through the hole on the back of the cabinet. Plug the power plug into the connection board on the lower layer
inside the cabinet.
z
Unpack the packing box of printer, place the related materials well and install the printer. Lead the printer USB data
cable to the computer. Install the ink cartridge. Plug the power plug of the printer power cable into the power supply
socket board on the lower layer inside the cabinet.
z
Install the antenna.
z
Install the monitor.
z
Lock the front and rear doors of the cabinet at last. The installation of main unit is complete.
Adjustment of the Main Unit
z
Debug the main unit before operating the wheel aligner.
z
Connect the main power cable to the power socket, press down the indicator switch on the left in the middle of the
cabinet to power the main unit.
z
Press down the power switch to start the computer. Enter the WINDOWS2000 operation system.
z
Press down the power switch of the printer. Print the test page to see if it is normal.
z
The adjustment of main unit is successful if all the above steps are normal. Exit WINDOWS2000 and shutdown the
computer.
Link Adjustment
z
Drive the vehicle onto the lift or over the pit, so that the front wheels are at the centers of the turntables; Apply hand
brake to ensure human safety. To prevent the turntable from turning, lock the turntables with the lock pins before driving
the vehicle; release the lock pins after the vehicle is placed well.
z
Install the wheel clamp on the wheel and turn the knob to lock the wheel clamp. The claws of the wheel clamp should
be fixed on the external or internal edge of the rim according to the practical condition. Ensure equal depth for each
claw and avoid attaching it on the distorted area. Use the tie to bind the wheel clamp to the wheel rim to avoid falling
accidentally.
z
Install the probe rods on the corresponding wheel clamps according to the specified position through the slide bars of
the wheel clamps (Fig.2.1). The connection of the front right wheel is as shown in Fig.2.1.
Fig.2.1
z
Level the probe rod by adjusting the bubble in the level gauge to the center position.
z
Place the steering wheel holder on the driver seat; and press the handle to lock the steering wheel.
z
Put the brake pedal depressor between the brake pedal and the driver seat to keep the brake applied.
z
Restart the computer and enter the WINDOWS2000 operating system. Click the icon of X-631or X-631+ Wheel Aligner
program to run the program. The screen will display the main function menu. Please read the user’s manual for
detailed operation instructions.
Summary of Contents for X-631
Page 1: ......
