Launch
X-631 Wheel Aligner Maintenance Manual
Maintenance and Testing for Some Components
4-2
Item23: Wheel Clamp Inspection
Note:
1. Check the wheel clamp for distortion (especially for clamping claw);
2. Check if the rotary handle can rotate normally or not, and check if the clamping claw can flex
freely.
3. Check if locking handle can lock the main axle of probe rod or not.
Rotary handle
Clamping claw
Wheel clamp hole base
Check each screw
for looseness
Check each screw
for looseness
Locking handle
