Launch
X-631 Wheel Aligner Maintenance Manual
Maintenance and Testing for Some Components
4-3
Item24: Brake Pedal Depressor Inspection
Note
：
1. Check the brake pedal depressor for distortion and damage;
2. Check if clip plate spring can move normally, and check if the moving assembly can slide along the leader
freely.
Item25: Steering Wheel Holder Inspection
Note:
1.
Check the fixing bracket for
distortion, and check the base
for break;
2.
Check if the clip plate can be
pressed or not, and check if
the moving part can move or
not.
Moving assembly
Clip plate
Moving assembly
Clip plate
Base
