Maintenance
7
Storage of the board
1. Turn the iron and boiler switches to the off position.
Unplug system.
2. Take the monotube out of cord-holder.
3. Remove cord-holder from ironing board.
4. Place iron in basket.
5. Slide basket under the board. You can store the
system even if the iron is still hot.
6. Lift ironing board by both ends, weight of generator
will automatically fold the system.
7. You can leave water in generator until next use.
Cleaning the iron
Rinsing the boiler - cold appliance!
Risk of burns! Make sure the appliance is cold before rinsing. After unplugging, allow the appliance to
cool for at least 2 hours before rinsing.
To prolong the efficiency of the steam generator and avoid calcium deposits
you must rinse the steam gen-
erator regularly.
English
Use our Polyfer cleaning cloth which you can obtain from your supplier mak-
ing sure you follow the written instructions. Clean the soleplate more often if
you use starch when ironing (even if the starch deposit is not visible).
Please refer to the instructions below for rinsing.
1.
Disconnect the power supply.
2.
Allow the appliance to cool for at least 2 hours.
3.
Fix the board in the highest position.
4.
Place the drain receptacle under the boiler.
5.
Unscrew the drain cap.
6.
Unscrew the filling cap.
7.
Pass the contents of a bottle of tap water through the boiler to
remove any scale.
8.
Repeat this operation until the water coming out of the boiler is
free of residues.
9.
Screw the drain cap back on.
10.
Fill up with water.
11.
Screw the filling cap back on.
N.B.: If no water comes out of the drain opening this should be
unblocked with a pointed instrument.
WARNING: Risk of splashes
Calcium content
Number of hours use between 2 rinses
Weak, zero or with the LauraStar Aqua water-filter pot 20
Average
15
High
10
MagicEVO2-PreEVO2 Anglais 28.1.2003 10:16 Page 9
