OPERATING INSTRUCTIONS
Your timepiece is equipped with an automatic mechanical movement and has a
72-hour power reserve.
Special attention has been paid to the winding system, which is fitted with a ball-shaped
winding crown to ensure a particularly smooth handling.
Crown positions:
Position
0
: normal running position.
Position
1
: manual winding position - crown unscrewed.
Position
2
: rapid date correction position.
Position
3
: hour and minute correction position.
To adjust or wind your timepiece, you will need to unscrew the crown by turning it three or four
times in an anti-clockwise direction.
If your watch has stopped, first wind your timepiece (position 1), then proceed to
rapid date
correction by turning the crown in an anti-clockwise direction only (position 2)
. Finally,
set the time (position 3).
Push the crown back into position 1 after each time-setting operation and then screw it back
down by turning it clockwise to return it to its normal running position (position 0).
0
1
2
3
Summary of Contents for AUTO
Page 1: ...AUTO CALIBRE LF270 01 OPERATING INSTRUCTIONS ENGLISH...
Page 7: ......
